Head Protection Standards

We source PPE head protection such as safety helmets and bump caps from a number of the world’s leading manufacturers.

Therefore, we are confident that we can supply your business or organisation with high quality head protection equipment at the lowest possible prices.

The products that we supply are designed to protect the head from impacts from falling or flying objects, risk of head bumping, hair entanglement. They are comfortable and lightweight, the PPE range will ensure a pleasant wear, even for long periods.

If you need help or advice on anything to do with head protection please call our knowledgeable customer support staff on 01226 215 204, email safetywear@bos4ppe.co.uk or use the contact form below.

your alt here

See below for advice on European Standards for Industrial Safety Helmets and Head Protection.

EN 397:2012 – Industrial Safety Helmets

Mandatory tests:

Impact*: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high.

Penetration*: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull.

Flammability: The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame.

*Impact and penetration test are performed at room temperature, at +50℃ and at -10℃.

Optional Tests:

Resistance at extreme temperatures: testing impact and penetration are performed at +150℃ ,at -20℃ or -30℃ temperatures.

Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440V AC.

Lateral deformation: Protects against lateral compression. The maximum deformation of the helmet should be ≤ 40 mm (LD).

Molten Metal Splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM).


EN 50365:2002 Insulating helmets for use on low voltage installations

This standard is for helmets used for working live or close to live parts on installations not exceeding 1000V AC or 1500V DC. Testing to EN50365 exceeds testing under EN397 for electrical properties. Marking: double triangle + class +batch number.


EN 12492:2012 Helmets for mountaineers

This standard covers specialist mountaineers' helmets and it includes tests on helmet retention, strength and effectiveness to ensure the helmet is not inadvertently removed.  To reflect the nature of the use, impact and penetration tests are conducted on different points around the shell.  Mountaineer requirements also apply to wearers working at  height.



Contact Us

Head Office:

12-18 Summer Lane,

Barnsley

S70 6BN


Phone:
01226 98 22 98
Email: sales@bos4you.co.uk

Send